DIY External Joystick box – v1

Posted on by surrenity

Using this joystick controller.

https://www.amazon.com/gp/product/B00UUROWWK/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1

Sketching out the distance
Using an acrylic sheet as the top
Marking out the drill holes
1/2″ and the 5/16″
Need a drill press for cleaner holes
Didnt have 16mm for the red switch toggles
connecting all the wiring
testing the board and the buttons
cutting some rabbit grooves to slide the panel in. Luckily enough it was the kerf of the blade
assmble a base, wood was warped
add some screw stoppers so the board wont slide
all hooked up
done